Send/Box Density Adjust; Print Density; Drum Refresh - Kyocera Mita TASKalfa 250ci Operation Manual

Send/Box Density Adjust

Adjust scan density when sending or storing the data in Document Box. Adjustment can be made in 7 levels
both in auto and manual density modes.

Print Density

Adjust print density. Adjustment can be made in 5 levels.
Use the procedure below to adjust the print density.

Drum Refresh

Refresh the drum when image blur or white spots appear on images in copies.
CAUTION:
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
Use the procedure below to refresh the drum.
OPERATION GUIDE
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and [Next] of
Send/Box Density Adjust..
3
Press [Change] of Auto or of Manual.
4
Press [-3] - [+3] (Lighter-Darker) to adjust density.
5
Press [OK].
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and
[Change] of Print Density.
3
Press [1] - [5] (Lighter-Darker) to adjust density.
4
Press [OK].
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance].
3
Press [Next] of Drum Refresh.
8
8-53