CLUTCH/GEARSHIFT LINKAGE
Remove the gearshift spindle.
Remove the following:
– Stopper plate bolt
– Shift drum stopper plate
– Dowel pin
– Stopper arm bolt
– Stopper arm
– Return spring
INSPECTION
Inspect the return spring for damage and inspect the gearshift
spindle for wear or bending.
INSTALLATION
Install the stopper arm return spring and stopper arm.
Install and tighten the stopper arm bolt to the specified torque.
TORQUE: 12 N.m (1.2 kg.m, 9 ft-lb)
8 -1 0
GEARSHIFT SPINDLE
STOPPER PLATE
STOPPER PLATE BOLT
RETURN SPRING
GEARSHIFT SPINDLE
STOPPER ARM
STOPPER ARM BOLT
XL2 0 0
STOPPER ARM BOLT
RETURN SPRING