Clutch Removal - Honda CR 125R 2002 Sevice Manual

CLUTCH/KICKSTARTER/GEARSHIFT LINKAGE
CLUTCH
9-4
Install the dowel pins and new gasket.
Insla llt he right crankcase cover w hi le engaging
water pump gear with the primary drive gear.
Install and tighten the bolts with the hose clamp
(After 2001 :) to Ihe specified torque.
TORQUE: 10 N-m 11 .0 kgt-m, 7lbfooft)
Install the right crankcase cover.
Inslallthe AC valve cover and valve rod (page 7-12).
Install the kickstarter pedal and bolt.
Tighten th e kicks tarter peda l bolt to the specified
torque.
TORQUE: 38 N-m (3.9 kgPm, 28 IbMt)
Install the brake pedal (page 13-21).
Install the expansion chamber (page 2-7).
Fill the transmission with the recommended oil to
the correct level (page 3-9).
Pour the radiator coola nt mixture into the radiator
up to the correct level (page 5-4).
Check and adjust the rear brake pedal height (page
3-15).
Start the engine and check for oil leaks.
CLUTCH REMOVAL
Remove the brake pedal (page 13·20).
Remove the bolts and clutch cover.