Shock Absorber Damper Rod Inspection; Shock Absorber Damper Assembly - Honda CR 125R 2002 Sevice Manual

REAR WHEEL/SUSPENSION
2000 - 2001 :
DAMPER ROD INSPECTION
Inspect the damper rod sliding surface for damage
or distortion.
DAMPER ASSEMBLY
Before assembly, wash all parts with solvent and
blow them dry with compressed air.
Be sure that there is no dust or lint on any of the
parts.
NOTE:
Never assemble valves which rT)ay have become
dusty or otherwise contami nated during the dis-
assembly process. Disassemble them, thoroughly
clean them with solvent and blow t hem dry with
compressed air before assembly.
CAUTION :
• Use
eddttd car"
to
avoid getting solvent on the
piston ring lind O-ring.
• The valve e",lng"ment and number of
lIa'"tIS
may
differ from those shown.
DAMPING ADJUSTER
END NUT
~ OCKNUT
WASHERS
()
.
VALVE STOPPER
ADJUSTING NUT
CHAMBER CAP
8
mm
(0.3
in) 8 mm (0.3 in)
- 11-
--jf-
•
4
10
- I
SLIDING SU RFACE
WASHERS REBOUND VALVES VALVE
STOPPER
~
/
o
VALVE STOPPER
~
COMPRESSION
VALVES
SPAING SEAT
PLATE
SPRI N G SEAT
STOPPER
RUBBER STOPPER
'AlJBEIER SEAT
VALVE STOPPER
REBOUND VALVES
COMPRESSION VALVES
12-18