Piston Removal - Honda CR 125R 2002 Sevice Manual

CYLINDER HEAD/CYLINDER/PISTON
7-6
Remove the alternator cover (page 14·8).
Rotate the flywheel counterclockwise until the piston
is at
TOC.
loosen the
cylinder
nuts in
11
crisscross pattern in
two or three steps.
Remove the cylinder, gasket and dowel pins.
Remove the AC "atye system (page 8-4).
Remove the exhaust pipe joint (page 6·2).
PISTON REMOVAL
NOTE:
Do not let the clips fall into the crankcase.
Always support the piston when pressing out the
pin.
Remove the piston pin clip, piston pin and piston.
NOTE:
Under racing conditions, the piston and piston ring
shou ld be replaced according to the maintenance
schedule. See page 3-3.
CYLl~
PISTON
~