Honda CR 125R 2002 Sevice Manual page 197

FRONT WHEEL/SUSPENSION/STEERING
If you will
not
disassemble the throttle housing,
remove the throttle housing as an assembly as
follows.
loosen the throttle housing botts, turn the handlebar
to t he left fully. then remove the throttle housing.
If you will disassemble the throttle housing, remove DUST CClV"A
the throttle housing dust cover.
Remove the throttle housing cover by removing the
screws. Slide the rubber protector off the throttle
cable end loosen the lock nut and adjuster.
Remove the throttle cable roller and collar.
Disconnect the throttle cable end from the throttle
drum remove the cable from the housing by remov-
ing the lock nut and adjuster.
Loosen the throttle housing mounting bolts and
remove the throttle drum from th e handlebar.
Remove the handlebar holder bolts, upper holders
and handlebar.
7GCOVEA
11-25