Swingarm Removal - Honda CR 125R 2002 Sevice Manual

SWINGARM
REMOVAL
Raise the rear wheel off the ground by placing a work-
stand under the engine.
Remove the rear wheel (page 12-4).
After200I :
Remove the brake pedal (page 13-22),
Remove the shock arm bolt and nut {swingarm side},
2000 -
2(}()1: Remove the screws and brake hose guides.
After 2001:
Remove the screw and brake hose guide.
REAR WHEEL/SUSPENSION
BOLT/NUT (S\VINIGA,RM SiDE) .......
Remove the rear brake caliper from the slide rail on CALIPER
~RAC:KET
the swingarm,
CAUTION:
• Do not disconnect the hydraulic line .
• Do not suspend the brake caliper from the brake
hose.
12-31