Brake Pad Replacement - Honda CR 125R 2002 Sevice Manual

BRAKE PAD/DISC
BRAKE PAD REPLACEMENT
A contaminated brake disc or pad reduces stopping
power. Discard contaminated pads lind clean
II
contaminated disc with
lJ
high quality brake degrea-
sing agent.
Remove the brake disc cover (page 11-4).
AIw"ays replace
tflB
Push the caliper pistons all the way in to allow instal-
brake pads In pairs
lation of new brake pads.
10 assure even disc
pressure.
NOTE :
~=--------------------
Check the brake fluid level in the brake master cylinder
reservoir as th is operation causes the level to rise.
Remove the pad pin plug and remove the pad pin.
Afrer2001 : REAR:
Remove the pad pin.
Remove the O-ring from the pad pin.
Remove the brake pads.
HYDRAULIC BRAKE
After 2001
~~o~'n,
13-7