Crankcase Separation - Honda CR 125R 2002 Sevice Manual

CRANKCASE/CRANKSHAFT/TRANSMISSION
CRANKCASE SEPARATION
10-4
NOTE:
Refer to service information (page 10-1) for removal
of necessary parts before separating the crankcase.
Remove the drive sprocket guard by removing the
two bolts.
Loosen the drive sprocket bolt white holdi ng the
sprocket with the universal holder.
TOOL:
Universal holder 07725 - 0030000
Remove the cone spring washer and drive sprocket.
Temporarily i nstall the clutch outer guide. needle
bearing and clutch outer onto the mainshaft.
Insert the gear holder between the primary drive
and driven gear.
Remove the primary dr ive gea r bolt, then remove
the washer and drive gear.
TOOL:
Gear holder
07724 - 0010200 Not
available in U.S .A.
Check the primary drive gear for wear or damage.
Remove the clutch outer, needle bearing and outer
guide.
Remove the collar from the crankshaft.
. y
,