Front Wheel/Suspension/Steering Troubleshooting - Honda CR 125R 2002 Sevice Manual

TROUBLESHOOTING
Hard steering
Steering adjusting nut too tight
Faulty or damaged steering head bearings
Insufficient tire pressure
Steel"$ to one side or does not track straight
Bent fork tube
Bent axle
Wheel installed incorrectly
Unequal oil quantity in each fork tube
Faulty steering head bearings
Bent frame
Worn wheel bearing
Worn swingarm pivot com ponents
• Unevenly adjusted right and left fork legs
Front wheel wobbling
Bent rim
Worn front wheel bearings
Bent spokes
Faulty tire
Axle not tightened properly
Unbalanced tire and wheel
FRONT WHEEL/SUSPENSION/STEERING
Whe el turn. hard
Faulty wheel bearing
Bent front axle
Brake drag
Soft suspension
Insufficient fluid fork
Fork oil viscosity too high
Weak fork springs
Tire pressure too low
Hard suspension
Excess fork oil
Fork oil viscosity too thick
Bent or damage for k tubes
Clogged fork f luid passage
Front suspension noisy
Insufficient fluid in fork
• Loose fork fasteners
11-3