Honda CR 125R 2002 Sevice Manual page 190

FRONT WHEEL/SUSPENSION/STEERING
11-18
Install the stop ring to the groove of the slider.
Install the dust seal.
CAUTION:
The
outBr
tube can move up lind down freely on
the slider. Always grip both the
DutM
tube
lind
slider
with
your
hands, or the guide, bushings and dus t
sea' might be dam aged.
To avoid damaging the dust seal, lower the outer
tube gently onto the axle holder.
If you removed the bladder from the fork damper,
measure the full length of bladder.
If the fu ll
length is under the se rvice limit, replace
with
a new one.
SERVICE LIMIT: 387 mm (15.2 i n)
Apply fo rk oil t o the bladder lips.
Install the bladder aligning the lips on the bladder
with the grooves on the fork damper.
Check the bladder is not twisted.
Install the new six stop ri ngs securely.
RING
DUST
DUST
AXLE HOLDER
BLADDER
,
I
-
r
,
2000