Crankshaft Installation - Honda CR 125R 2002 Sevice Manual

CRANKCASE/CRANKSHAFT/TRANSMISSION
Clean and apply a locking agent to the shift drum f
bearing set plate bolts and tighten the bolts with
the set plates.
TORQUE: 10 N'm 11.0 kgf·m, 1lbf·hl
CRANKSHAFT INSTALLATION
Clean both crankcase mating surfaces before assem-
bling and check for wear or damage.
NOTE:
If there is minor roughness or irregu larities on
the crankcase mating surfaces. dress them with
an oil stone.
After cleaning, lubricate the crankshaft bearings
with recommended clean 2-stroke oil.
Install the threaded adapter on to the crankshaft.
TOOL:
Threaded adapter
07965 - KA30000
Install the crankshaft into the right crankcase using
the special tools.
TOOLS:
Crankcase assembly tool set 07965 -1660102 Not
available in U.S .A. or
07965 - 1660101 or
07965 - 1660100
- Assembly tool shaft
- Assembly collar
07965 - 1660200
07965 - 1660302 or
07965 - 1660301 or
07965 -1660300 or
01965 - 166030A
(U .S.A . only)
CRANKCASE ASiiEMBLY
o
.,~
10-13