Fork Inspection - Honda CR 125R 2002 Sevice Manual

FRONT WHEEL/SUSPENSION/STEERING
Remove the dust seal and stop ring.
CAUTION:
Be careful not to scratch the slider.
Check that the slider moves smoothly in the outer
tube.
If it does not, check the slider for bend or damage,
and the bushings for wear or damage.
If the slider and bushings are normal, check the ouler
tube.
In quick successive motions, pu l l the slider out of
the outer tube.
Carefully remove the slider bushing by prying the DUST
slot with a screwdriver until the bushing can be
pulled off by hand.
CAUTION:
Do not damage the slider bushing, especially the
sliding surface. To prevent loss of tension, do not
open the bushing more than necessary.
Remove the following from the slider.
- Guide bushing
- Back-up ring
- Oil seal
- Stop ring
- Dust seal
INSPECTION
FORK CAP
Check that the O-ring on the fork cap is in good
condition .
RING
\
BACK-UP RING SUDER BUSHING
11-13