Honda CR 125R 2002 Sevice Manual page 146

CLUTCH/KICKSTARTER/GEARSHIFT LINKAGE
Insert the return spring into the spring hook on the
starter spindle shoulder.
Install the collar by aligning the cut-out of the collar
with the spring. then install the thrust washer.
RETURN SPRING
~
Apply molybdenum disutifide oil to the kickstarter SNAP RING
spindle.
Install the thrust washer and pinion gear.
Install the thrust washer.
Set the sharp edge
Install the snap ring in the groove of the spindle.
of the snap ring
facing towards the
outside.
9-14
Aligning the punch marks and install the starter
ratchet.
Install the ratchet spring.
STI'RT·ER RATCHET
THRUST WASHER
RATCHET SPRING