Control Cables; Expansion Chamber/Silencer Glass Wool Replacement - Honda CR 125R 2002 Sevice Manual

MAINTENANCE
Major adjustments are made with the in line cable
adjuster located behind the number plate.
loosen the lock nut and turn the adjuster.
Tighten the lock nut.
If proper free play cannol be obtained using both
procedures or the clutch slips during the test ride,
disassemble and inspect the clutch (See section 9).
CONTROL CABLES
Remove the throttle housing dust cover.
Remove the throttle cable end cover.
Remove the throttle cable roller and collar.
Oisconnect the throttle cable end from the throttle
grip.
Disconnect the clutch cable upper end from the
clutch lever.
II
is
not necessary Thoroughly lubricate the cable pivot points with a
10 lubricate the commercially available cable lubricant.
cables.
If the clutch lever or throttle operation is not smooth,
replace the cable.
CAUTION:
Be sure the throttle returns freely from fully open
to fully closed eutometically, in all steering pos/.
tions.
Installation is in the reverse order of removal.
EXPANSION CHAMBER/SILENCER
3-16
SILENCER GLASS WOOL REPLACE-
MENT
Remove the silencer case (page 2-6) .
Remove the silencer case bolts.
Pull out the inner pipe.
NOTE:
Hold the mounting tab (after removing collar rubber)
of the silencer case gently in a vise protected with a
shop towel or soft jaws.
INCREASE PLAY
COVER
/
CASE PIPE
~