Steering Stem Installation - Honda CR 125R 2002 Sevice Manual

FRONT WHEEL/SUSPENSION/STEERING
Temporarily install the stem nut to avoid damaging LOWER SEAL
11-32
the steering stem threads.
Remove the lower tapered roller bearing and dust
seal from the steering stem.
Install the new dust seal.
Pack the upper and new lower tapered roller bear-
ings with grease.
Install the lower bearing using a hydraulic press and
special tool as shown.
TOOL:
Attachment. 30 mm 1.0.
07746 - 0030300
INSTALLATION
Apply grease to all of the bear ing area.
Install the upper tapered roller bearing in the
steering head.
Slide the steering st em into the steering head from
the bottom.
Install the dust seal.
Install the steering head adjusting nut.
Tighten the steering head adjust ing n ut with the
steering stem socket.
TORQUE: 7 N·m (0.7 kgf·m, 5.1 Ibf.ft)
TOOL:
Steering stem socket 07916 - 3710101 or
Adjustable pin spanner wrench
07702 - 0020001
LOWER B"',R"'G
UPPER
SEAL
SOCKET