Ignition Coil Inspection; Ignition Coil Removal/Installation - Honda CR 125R 2002 Sevice Manual

I
,
IGNITION SYSTEMI ALTERNATOR
IGNITION COIL
INSPECTION
Remove the teft radiator shroud (page 2-3),
Remove the spark plug cap.
Disconnect the ignition coil primary wire.
Measure the ignition primary coil resistance between
the primary terminal and body ground.
STANDARD;
(2000 - 2001 :) 0 .1 - 0.3 0
(20°CJ68°F)
(After 2001 :) 0.4 - 0.6
n
(20"C / 68~F)
2000 - 2001 Shown •
PRIMARY TERMINAL
r
If the resistance is Oul of range, replace the ignition
C2 ~ OOO =~ - -2~OO~'~S"h ~o ~ w = n~ :
- -- - - - - - - - ,
coil.
Measure the ignition secondary ooil resistance between
the primary terminal and plug cap.
STANDARD:
(2000 - 2001 :) 9 - 16 kO (20°C/ 68"F)
(After 2001 :1 15 - 22 kO
(20<>C/68~ FI
If the resistance is oul of range, remove the spark 2000 _ 2001 Shown:
plug cap and measure the ignition secondary coil
resis-Iance between the primary terminal and spark
plu g wire.
STANDARD:
(2000 - 2001 :1 4 - 8 kO
(20°C/ 68~ F)
(After
2001 :)
10 - 17 kO (20° C / 68~ F)
If resistance is out of range, replace the ignition coil.
REMOVALIINSTALLA TION
Remove the left radiator shroud (page 2-3).
Remove the spark plug cap.
Disconnect the ignition coil primary wire.
Remove the bolts and ignition coil.
Installation is in the reverse order of removal.
200 1 Shown :
PRIMARY WIRE
..
14-7