Front Wheel Installation - Honda CR 125R 2002 Sevice Manual

FRONT WHEEL/SUSPENSION/STEERING
11-8
Install the brake disc onto the wheel hub with the
"¢ DRIVE " mark facing out.
Clean and apply a locking agent to the brake disc
bolt threads.
Install the brake disc bolts and nuts.
Tighten the nuts to the specified torque.
TORQUE: 16 N·m (1.6 kgf·m, 121bfoft)
Pack the left dust seal lip with the grease and install
the left dust seal.
Check the right and left wheel collars for wear or
damage.
Install the right and left wheel colla rs to the wheel
as shown.
INSTALLATION
Clean the clamping surface aftha axle shaft and axle
holders.
Install the front wheel between the fork legs.
Fit the caliper over the disc, taking care not to
damage the brake pads.
Apply a thin layer of grease to the axle and insert
the axle from the right side.
Install and tighten the axle nut to the specified
torque.
TORQUE:
sa
N· m (9.0 kgf.m, 65 Ibfoft)
Tighten the left axle holder bolts to the specified
torq ue.
TORQUE: 20 N· m (2.0 kgf.m, 14lbfoft)