Frame/Body Panels/Exhaust/System Service Information; Frame/Body Panels/Exhaust/System Troubleshooting; Frame/Body Panels/Exhaust/System Torque Values - Honda CR 125R 2002 Sevice Manual

2. FRAME/BODY PANELS/EXHAUST/SYSTEM
SERVICE INFORMATION
2-1
NUMBER PLATE
2-3
TROUBLESHOOTING
2-1
SUB-FRAME
2-4
SEAT
2-2
FUEL TANK 2-5
SIDE COVERS
2-2
EXHAUST PIPE
2-6
RADIATOR SHROUD
2-3
SERVICE INFORMATION
GENERAL
• Gasoline;s extremely flammable end is explosive under certein condition. KEEP OUT OF REACH OF CHILDREN.
• Serious burns may result if th e exhaust system is not sf/owed to cool before components are removed or ssrvicBd.
• Work in a well ven t ilated area. Smoking or al lowing flames or sparks in the work area or where gasoline is stored can
cause a fire or explosion.
• This section covers removal and installation of the body panels, fuel tank and exhaust system.
• Always replace the exhaust pipe gaskets aft er removing the exhaust pipe from the engine.
• Always inspect the exhaust system for leaks after installation.
TORQUE VALUES
Seat mounting bolt
Sub·frame mounting bolt (upper)
Seat bracket screw
Front chamber stay bolt
Footpeg bracket bolt (upper)
(lower)
TROUBLESHOOTING
Excessive exhaust noise
- Broken exhaust system
- Exhaust gas leak
Poor performance
- Deformed exhaust system
- Exhaust gas leak
- Clogged muffler
26 N-m (2.7 kgf-m, 20 Ibfoft)
29 N-m (3.0 kgf-m, 22 Ibfoft)
6 N-m (0.6 kgf-m, 4.3 Ibfoft)
12 N-m (1.2 kgf-m, 9 Ibfoft)
54 N-m (5.5 kgf-m, 40 Ibfoft)
42 N-m (4.3 kgf-m , 31 Ibf-ft)
2-1