Water Pump Mechanical Seal Inspection; Water Pump Removal - Honda CR 125R 2002 Sevice Manual

CAUTION:
Be careful not to dam ag e th e radia tor
core.
Installation is essentially the reverse order of
removal.
Add the recommend coolant mixture up to the filler
neck and bleed the air (page 5-4).
After installation, check the radiator and radiator
hoses for leaks.
Install the radiator shrouds (page 2-3).
WATER PUMP
MECHANICAL SEAL INSPECTION
Inspect the telltale hole for signs of coolant leakage.
If there is leakage, the mechanical seal is defective
and replace the water pump as an assembly.
REMOVAL
Drain the coolant (page 5-5).
Remove the four flange bolts and water pump cover.
Remove the outer gasket and plate.
COOLING SYSTEM
5-7