Honda CR 125R 2002 Sevice Manual page 205

FRONT WHEEL/SUSPENSION/STEERING
Turn the steering stem lock-la-lock five times to seat
the bearings, then tighten the adjusting nut again.
Install the following:
- Top bridge
- Fork legs (page 11-221
- Washer onlO the top bridge
Install and tighten the stem nut to the specified
torque.
TORQUE:
2000: 147 N·m (15.0 kgf·m, 10Blbf.ft)
After 2000: 108 N·m (11.0 kgf·m, 80 IbHtl
Recheck the steering stem ad justment.
Turning the bridge side-la-side and check for
smoothness and no binding.
Install the brake hose guide and lighten the bolt to
the specified torque.
TORQUE: 5 N·m (0.5 kgf. m, 3.6 Ibfoft)
Install the front fender, washers, collars and tighten
the botts.
Install the following:
- Number plate (page 2-3)
- Front wheel (page 1 '-8)
- Handlebar (page 11·26)
NUTt'lVASHER
..
11-33