Sub-Frame Removal; Sub-Frame Installation - Honda CR 125R 2002 Sevice Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
SUB-FRAME
2-4
REMOVAL
Remove the seat (page 2-2),
loosen the air
cleaner
connecting tube band screw.
Remove the three sub-frame mounting bolts.
Remove the sub-frame by pulling it straight back-
wards.
INSTALLATION
loosely attach the upper and lower ends of the sub-
frame to the main -frame while connecting the
expansio n chamber to the silencer pipe with the
seali ng rubber and the air cleaner connecting tube
to the carburetor.
Tighten the screw on the connecting tube clamp.
Snug but do not tighten the three attaching bolts.
Tighten the sub-frame mounting bolts to the
specified torque.
TORQUE:
Upper. 29 N·m 13.0 kgf.m, 22 Ibfott)
Install the seat (page 2-2).
SUB-FRAME