Honda CR 125R 2002 Sevice Manual page 236

REAR WHEEL/SUSPENSION
Install the pivot collars and side callars to the shock
arm (swing arm side, shock link side),
Apply oil to the shock arm nut threads and flange
surface.
Temporarily install the following:
- Shock link
- Shock link bottinul
-Shock arm
- Shock arm bolt/nut (swingarm side)
- Shock arm boltlnut (shock link side)
Install the lower mounting bolt by aligning the cut
out of the bolt with the stopper on the shock ab·
sorber.
Tighten all nuts to the specified torque.
TORQUE:
Shock link nut: 78
~
(8.0 kgf-m. 58 IbMt)
Shock arm nut (swingarm side):
78
N-m
(8.0 kgfem , 58 IbMt)
Shock arm nut (shock link side):
18 N-m (8.0 kgt-m, 58 IbMt)
Shock absorber lower mounting nut:
44
N-m
/4.5 kgt-m, 33 IbMt)
2()()()-
2001:
Install the drive chain roller and tighten the bolt
Install tile drive
to the specified torque.
chain roller
with
its
•• marie side
facing
out.
12-30
TORQUE:
2000:
After 2000:
22 N-m (2.2 kgpm. 16 IbMt)
12 N-m (1 .2 kgpm. 9 IbMt)
SIDE COLLARS PIVOT COLLARS
J;)
.)
SH()CK LINK BOLT/NUT