Rear Wheel/Suspension Specifications; Rear Wheel/Suspension Torque Values - Honda CR 125R 2002 Sevice Manual

REAR WHEEL/SUSPENSION
SPECIFICATIONS
ITEM STANDARD
Cold tire pressure lOa kPa (1.0
kgf/cm 2
, 14 psi)
Axle (unout
- - -
Wheel rim runout
Radial
- - -
Axial
- - -
Wheel hub-Ie-rim distance 51.00 (2.008)
Drive chain slack 25-35(1-1-318)
Drive chain size/link
DID
2000: 520DM -'16
2001: 520DMA2 - 116
After 2001:
520DMA2 - 114
RK
2000;
520KZ6-'1S
Drive chain slider thickness
- -
Drive chain rolter 0.0.
- - -
Shock absorber Damper gas pressure
I
981 kPa
(10.0 kg/cm 2 ,
142 psi)
Damper compressed gas
I
Nitrogen gas
Damper rod compressed force
lB.1 - 22.1 kg (39.90 - 48.72 Ibfl
at 10 mm compressed
Spring direction
Narrow wound end of coil facing down
Spring installed 2000:
265 (10.4)
length (standard)
After 2000: 267 (10.5)
High speed side compression damping 2000 - 2001:
10/12 - '-2110 turns out from full in
adjuster standard position
After 2001: 1 -1/6 - 1-1/2 turns out from full in
Low speed side compression damping
2000: 9 - 12 clicks out from full in
adjuster standard position
2001: 8 - 1 1 clicks out from full in
After 2001: 11 - 14 clicks out from full in
Rebound damping adjuster 2000 - 2001: 22 - 26 clicks out from full in
standard position
After 2001: 18 - 22 clicks out from full in
TORQUE VALUES
Rear axle nut
Rear spoke nipple
Rear rim lock
127 N' m (13.0 kgf'm, 94 Ibfoft)
4 Nom (0.4 kgf· m. 3.0 Ibfoft)
U-nut.
13 N'm (1.3 kgf·m, 9 Ibfoft)
Unit: mm On)
SERV ICE LIMIT
0.20 (0.008)
2.0 (0.08)
2.0 (0.08)
- - -
- - -
- -
- - -
5 (0.2)
25 (1 .0)
- - -
- - -
- - -
- - -
- - -
- - -
- -
- -
- - -
Rear brake disc bolt (2000- 2001:)
Rear brake disc bolt/nut (After 2001 :)
Final driven sprocket nut
42 N·m(4.3 kgf'm, 31 Ibfoft)
Apply a locking agent to the threads.
Rear wheel bearing retainer
Swingarm pivot nut
Shock arm (Swingarm side)
(Shock link side)
Shock link (frame side)
Shock absorber mounting nut
Shock absorber spring lock nut
Drive chain roller bolt (2000:)
(After 2000)
Drive cham guide mouting nut
Drive chain slider screw
Rear brake hose guide screw
Shock absorber damper rod end nut
Shock absorber damping adjuster
12-2
16 N'm (1.6 kgf·m, 12 Ibf· ft)
32 Nom /3.3 kgf·m, 24 Ibfoft}
44 N o m(4.5
kgf· m, 33 Ibfo ft)
88 Nom (9.0 kgfom. 65 Ibfoft)
78 N'm (8.0 kgf' m, 58 Ibfoft)
78 Nom (8.0 kgfom, 58 Ibfoft)
78 Nom (8.0 kgf·m , 58 Ibf· ft)
44 N' m (4.5 kgfom, 33 Ibfoft)
29 N'm (3.0 kgfom, 22 Ibf· ft)
22 Nom (2.2 kgfom. 161bf·ftl
12 N'm (1 .2 kgfom. 9 Ibfo ft)
12 N'm (1.2 kgf'm, 9 Ibfoft)
4 Nom (0.4 kgf· m. 3.0 Ibfoft)
1.2 Nom (0.12 kgfom. 0.87Ibf· ft)
26 N'm (2.7 kgf·m. 20 Ibfoft)
29 N'm (3.0 kgf' m, 22 Ibfoft)
U-nut.
U-nut.
U-nut.
U-nut.
U-nut.
U-nut.
Applya locking agent to the threads.
Stake.
Stake.