Characters Or Graphics Are Not Printed In Correct Position - Sharp AJ-1805 Online Manual

Characters or Graphics are not Printed in Correct Position

If a document is printed skewed or partly off the paper, follow the steps listed below.
CHECK1 Is the paper size loaded in the tray the
same as that specified in the printer driver?
Click the "Paper" tab in the properties dialog box, and
check if the "Paper Size" options suit the size of the
paper loaded in the tray. If the "Fit To Page" setting is
activated, make sure that the paper size selected from
the drop-down list of the "Print xxx on:" option is the
same as the size of the loaded paper.
Example "Print A4 on:" A6
CHECK2 Is the orientation of document setting
correct?
Click the "Main" tab in the properties dialog box, and
verify if the "Orientation" option is set to your
requirements.
CHECK3 Did you correctly select the desired value
for "N-Up Printing"?
Confirm the selected value for "Original Size" when
"2-Up" or "4-Up" has been selected for "N-Up
Printing". If you have selected a smaller paper size than
the document size of your application, the image
outside the printable area is not printed.
How to Use the
Printer Properties
Online Manual
CHECK4
CHECK5
Print Status
Print
Window
Is the paper loaded correctly?
If a document is physically damaged when it is output
or the image is skewed on the paper, discard the
damaged sheet, reinsert the paper supply and print
again. Insert the paper so that there is no visible space
between the paper and the paper guides.
See "LOADING PAPER" in the Setup Guide
Reference:
and Operation Manual for more details on
inserting paper.
Did you correctly specify the margins for
the application in use?
Check the layout of the document margins and the
paper size settings for the application you are using.
Also check if the print settings are specified correctly
to suit the paper size.
Quality guaranteed area
Reference:
Sharing Printer Maintenance
Troubleshooting
56
Troubleshooting