Scanning And Transmitting A Two-Sided Original (When Using B/W Scanner Module/Dspf) - Sharp AR-M351N Operation Manual

SENDING AN IMAGE
SCANNING AND TRANSMITTING A TWO-SIDED ORIGINAL
(when using B/W scanner module/DSPF)
If a B/W scanner module/DSPF is installed, a two-sided original can be automatically scanned and transmitted using
the automatic document feeder. Follow the steps below.
1
Make sure the machine is in scanner mode
and then load the document in the
automatic document feeder.
2
Touch the [ORIGINAL] key.
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
ORIGINAL
3
Touch the [2-SIDED BOOKLET] key or the
[2-SIDED TABLET] key as appropriate for
the original you loaded.
SCAN SIZE SEND SIZE
100%
AUTO A4 AUTO
2-SIDED
2-SIDED
BOOKLET
TABLET
NOTES
Booklets and tablets
Two-sided originals that are bound at the side are booklets, and two-
sided originals that are bound at the top are tablets.
Two-sided scanning turns off after the document is stored in memory.
Pressing the [CA] key will also cancel two-sided scanning.
When you touch the
[ORIGINAL] key, check
the original size
displayed in the key.
If necessary, touch the
[SCAN SIZE] key and
set the original size.
(page 20)
19
4
Touch the [OK] key.
RESEND
SIZE
OK
AUTO
A two-sided original icon appears next to the
[ORIGINAL] key.
(Example: The icon that appears when the [2-
SIDED BOOKLET] key is touched.)
300 x 300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO A4
ORIGINAL
5
Continue from
TRANSMISSION METHOD"
BOOKLET
You will return to the
initial screen.
step 4 of "BASIC
(pages 12 to 15).
TABLET