Automatic Transmission At A Specified Time (Timer Transmission); Setting Up A Timer Transmission - Sharp AR-M351N Operation Manual

SPECIAL FUNCTIONS
AUTOMATIC TRANSMISSION AT A SPECIFIED TIME (TIMER
TRANSMISSION)
This feature enables you to set up a transmission to be performed automatically at a specified time up to a week in
advance. A combined total of 97 timer transmission and memory transmission jobs can be stored.
NOTES
To perform a timer transmission, the document must be scanned into memory. It is not possible to leave the
document in the auto document feeder or on the document glass and have it scanned at the specified time of
transmission.
To set the date and time in the machine, refer to page 2-13 of "Operation manual (for general information and
copier operation))".
After a timer transmission is performed, the information (image, destination, etc.) is automatically cleared from
memory. (However, when the document filing function is used, the scanned document image is stored in the
machine's hard disk. For information on managing stored images, see "Document filing functions" in chapter 7
of the "Operation manual (for general information and copier operation)".)

SETTING UP A TIMER TRANSMISSION

1
In scanner mode, touch the [SPECIAL
MODES] key.
ADDRESS REVIEW
SPECIAL MODES
FILE
ENTRY
TTINGS
QUICK FILE
2
Touch the [TIMER] key.
PROGRAM
TIMER
3
Select the day of the week. (Touch the
key or the key until the desired day is
selected.)
TIMER
DAY OF THE WEEK
NOTES
Other operations can be performed after a timer transmission is set up. If another operation is in progress when
the specified time arrives, the timer transmission will begin when the job in progress is completed.
If a timer transmission job is given priority in the job status screen (See "PRIORITY TRANSMISSION OF A STORED
JOB" on page 34.), the time setting will be cancelled and the job performed as soon as the current job is completed.
If the address book
screen appears, touch
the [CONDITION
SETTINGS] key
display the condition
settings screen (page
11).
The timer transmission
screen appears.
ER
The initial setting is "---"
(no selection). If you
select this setting, the
transmission will
performed as soon as
the specified time
arrives.
4
Select the time. (Touch the
key until the desired time appears.)
TIME
to
0
HH.
5
Touch the outer [OK] key.
OK
CANCEL
6
Scan the image as explained in "BASIC
TRANSMISSION METHOD"
be
27
key or the
Select the time in 24-
CANCEL hour format.
Example:
11:00 P.M.
00
mm.
You will return to the
screen of step 1 and a
timer transmission icon
will appear next to the
[EXPOSURE] key.
To cancel timer, touch the
OK
[CANCEL] key.
(pages 12 to
23:00
15).