Automatic Two-Sided Copying Using The Automatic Document Feeder - Sharp MX-M350U Operation Manual

NORMAL COPYING
Automatic two-sided
document feeder
When the optional duplex module is installed, the following automatic two-sided copying can be performed. The
paper is automatically turned over during copying, allowing two-sided copies to be made with ease.
Original
Place the originals in the document feeder
1
tray. (pages 4-3 to 4-6)
2 Touch the [2-SIDED COPY] key.
SPECIAL MODES
2-SIDED COPY
OUTPUT
4-10
copying
Copy
1. Automatic two-sided copying from one-sided
2. Automatic two-sided copying from two-sided
3. Automatic one-sided copying from two-sided
DED COPY
using the
originals
originals
originals
Select the desired copy mode.
3
BIND
CHA
If a copy key is touched for a mode that cannot
be selected, a double beep will sound.
Example of a
portrait-oriented
original
When making automatic two-sided copies of a
one-sided 11" x 17" (A3) or 8-1/2" x 14" (B4) size
portrait original, or when you wish to invert the top
and bottom of the back side of a two-sided original,
touch the [BINDING CHANGE] key.
4 Touch the [OK] key.
0
OK
BINDING
Perform steps 6 through 9 on pages 4-7 and 4-8.
automatic
The display will vary
depending on the
equipment installed.
Example of a
landscape-oriented
original