Table of Contents
Advertisement
Operator Panel
Except for CAP status and error or FSC information, these values are set through
an automatic configuration process that occurs during an IPL.
Values requiring your input are:
• Cleaning cartridge warning count
• SCSI drive configuration:
• SCSI ID
• Bus status (on or off bus)
• Network configuration:
• Library name
• IP address
• Subnet mask
• Library gateway
• Library configuration information:
• SCSI ID
• Fast Load enable/disable
• Date/time
• Display screen brightness and contrast
You can also use the menus to run diagnostic tests.
The following pages describe the library's primary menus. For instructions on
working with specific configuration values, see
Chapter 3, "Configuration."
Library Status
The "Library Status" screen is an information-only screen. It is the first screen to
appear on the operator panel after an IPL.
STK L700e (Code Version 2.20)
CAP Closed
Library Online
No Remote Users
Column 0
2-4
"Operator Panel Entry" in
Library type and firmware version
CAP status
Library status
Number of users logged onto the
the library through a remote
interface
The status of each drive in the
drive column
Tenth Edition
95845
Advertisement
Table of Contents
