Monitoring Status Information
Library Status
The following library status messages might appear:
Table 2-3. Library Status Messages
Status Message
LIB MAIN DOOR OPEN
LIB INIT REQUIRED
LIBRARY NOT READY
LIBRARY READY
LIB MAINTENANCE MODE
INTERVENTION REQUIRED
LIB UNKNOWN STATE
Remote Users Status
Following the library status line is a status line that indicates the number of
users who are currently accessing the library remotely (for example, through
the Horizon L Series Library Monitor).
At the time of publication, no additional status messages were available for this
line. The line will always read NO REMOTE USERS.
2-18
Explanation
The library's front door is open. When you
close it, the library will reinitialize.
The library requires initialization. This
message might appear momentarily after you
close the library's front door.
If the message remains on the screen, open
and close the front door. The library then
begins its initialization cycle.
The library is not available to perform
operator-requested actions. Some status
information might be available through the
network interfaces.
The library has completed initialization and is
ready to perform requested actions.
The library is offline because it is performing
diagnostic tests.
The library is experiencing a problem.
Note the fault symptom code (FSC) if the
library has displayed one and call your
service provider.
The library does not recognize its current
state.
Note the FSC if the library has displayed one
and call your service provider.
Ninth Edition
95895