MOTO GUZZI California EV Workshop Manual page 155

A
B
C
D
E
G
F
G
H
I
L
B
M
N
O
P
14
R
EMOVAL FOR
C
ALIFORNIA
E
• Place a paddock stand under the swinging arm to keep
the rear wheel lifted from ground.
D
• Remove left-hand silencer as described in chapter 2
section L.
• Unscrew brake caliper from the caliper "B" support
plate.
• Unscrew nut "D" with washer "E" on the shaft – housing
side.
• Remove shaft "G" from housing, from hub and from
swinging arm.
• Remove calipersupport plate "B" and spacer "H".
• Tilt the vehicle on the right hand side enough to be
able to remove the wheel from the swinging arm and
the transmission housing.
To reassemble the wheel, carry out the removal proce-
dure in reverse order and remember to place the caliper
support plate on the retainer of the left section of the
swinging arm.
B
H
C EV 2001 -
ALIFORNIA
S - C S
TONE ALIFORNIA PECIAL
W
HEEL PARTS
S
PORT