Rear Wheel - MOTO GUZZI California EV Workshop Manual

A
B
C
D
E
F
G
H
A
I
L
C
M
N
O
P
12
F
B
G
E
D
2

REAR WHEEL

CALIFORNIA EV
CALIFORNIA SPECIAL (1
R C
EMOVAL FOR ALIFORNIA
C S - C
ALIFORNIA PECIAL
• Place a paddock stand under the swinging arm to keep
the rear wheel lifted from ground.
• Remove left-hand silencer as described in chapter 2
section L.
• Unscrew setscrew "A" of the caliper support plate "B".
• Unscrew brake caliper "C" from the caliper support
plate "B".
• Unscrew nut "D" with washer "E" on shaft, housing
side.
• Loosen locking screw of shaft "F" on the swinging arm.
• Remove shaft "G" from housing, from hub and from
swinging arm.
• Remove caliper support plate "B".
• Tilt the vehicle on the right hand side enough to be
able to remove the wheel from the swinging arm and
the transmission housing.
To reassemble the wheel, carry out the removal proce-
dure in reverse order and remember to place the caliper
support plate on the retainer "A" of the left section of the
swinging arm.
W
HEEL PARTS
a
serie)
EV (1997-2000) -
J
ALIFORNIA ACKAL