Tray Mapping Setting; Tray Mapping Setting Procedure; Creating Tray Mapping Definition Prn File - Konica Minolta magicolor 8650DN User Manual

Appendix
17.5

Tray Mapping Setting

The actual paper source mapping against the value specified by the paper tray command included in the PCL
command can be changed.
This machine uses the following HP-compatible commands when specifying the paper tray.
PCL5: "PAPER SOURCE" command
PCL XL: "MEDIA SOURCE" command
17.5.1

Tray mapping setting procedure

Briefly, setting procedure for tray mapping is as follows.
1. Create a tray mapping definition PRN file.
2. Send the tray mapping definition PRN file to the MFP.
3. Turn off the power of this machine, then on again, and check the operation.
Note
This function is available only if the optional HDD is installed.
17.5.2

Creating tray mapping definition PRN file

Create a text file that includes the mapping information for each tray.
Use a text editor such as Notepad to create the following contents.
After completion, save the file with any desired file name.
Format
%!PS-Adobe-3.0
/df {
/dest exch store
/buf 512 string def
/sourcef (%stdin) (r) file def
/destf dest (w) file def
{
sourcef buf readstring
{ destf exch writestring }
{ dup length 0 gt
} ifelse
} loop
}bind def
(%disk0%../../env.ini) df
HPTRAY5E = (3), (4), (5), (6), (7), (8), (9) (return code)
HPTRAYXL = (3), (4), (5), (6), (7), (8), (9) (return code)
(1) Tray mapping information definition for PCL5
(2) Tray mapping information definition for PCLXL
8650
{destf exch writestring} {pop} ifelse
sourcef closefile
destf closefile
exit
Common parts requir-
ing no modification
(1)
Change this
part.
(2)
Description for only one of PCL5/PCLXL is acceptable.
(Descriptions for both are not required.)
17
17-10