Cooling Mode - Fuji Xerox DocuCentre-IV C2263 User Manual

2 Product Overview

Cooling Mode

The machine enters the Cooling mode if its internal temperature rises too high. During this
mode, the following screen is displayed on the touch screen.
This screen disappears when the internal temperature has cooled down. Wait until the
screen disappears.
If the room temperature is high, lower the room temperature because it may take longer
2
time for the machine to cool down.
Note
Important • During the Cooling mode, the fan inside the machine is working to release heat. Do not open the
60
• You can select [Close] to forcibly close the screen above. However, you cannot operate the machine
because the machine is still in the Cooling mode. Wait until the message "Machine Cooling in
Progress" disappears in the upper left corner of the screen.
front cover or switch off the machine during the mode.