Paper Tray Priority; Setting Paper Tray Priority; Managing Auto Tray Switching - Fuji Xerox Color C60 System Administrator Manual

Paper Tray Settings
Size Detection - Displays the setting in Paper Size.
4. Touch Save and touch Close.

Paper Tray Priority

Set the priority of the trays to use when paper of the same size and the same orientation
is set in the multiple trays or print data does not include the paper tray information for
automatic tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing. This setting applies to Trays 1 to 4 and
6 (optional). You cannot apply this setting to Tray 5.
Note
Not all Print Servers (DFEs) will adhere to this feature setting.

Setting Paper Tray Priority

To set paper tray priority:
1. At the printer Control Panel, log in as Administrator and then
Settings screen.
2. Select Paper Tray Priority. The following table lists the current default priority
settings.
Item
Paper Tray Priority
3. Touch Change Settings.
4. Touch each Tray and set the corresponding Priority.
5. Touch Save.
6. Touch Close.

Managing Auto Tray Switching

From the Paper Tray Settings area, you can set the alternative tray or paper to use when
running out of paper loaded in the selected tray.
Note
Not all Print Servers (DFEs) will adhere to this Auto Tray Switching feature setting.
3-6
access the Paper Tray
Current Setting
Tray: 6>7>4>3>1>2>5
Xerox
System Administrator Guide
® Color C60/C70 Printer