Rep 6.2 Lsu Fan - Xerox WorkCentre 4150 Service Manual

REP 6.2 LSU FAN

Parts List on PL 6.10
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
1. Remove the DADF. Refer to REP 5.1.
2. Remove the scanner assembly, REP 14.1.
3. Remove the exit assembly, REP 10.2.
4. Remove the rear LSU fan duct, PL 6.10 Item 4.
5. Remove the LSU fan, Figure 1.
1
Disconnect the
inline connector.
Figure 1 LSU fan removal
Repairs and Adjustments
REP 6.2
6. Remove the LSU fan from the front LSU fan duct, PL 6.10 Item 4.
Replacement
Replacement is the reverse of the removal procedure.
2
Pull out the LSU fan.
September 2006
4-22 WorkCentre 4150