Managing Lamp Information; Creating A New Lamp File - Christie CP2208 User Manual

Managing Lamp
Information

Creating a new lamp file

1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Complete these fields:
Field
Power%
Enable LiteLOC™
Light Meter - Set Target
Amps
Volts
Watts
2
~fL or ~cd/m
Hours
Intensity
3. Tap Save As.
4. Enter a name for the lamp file in the Filename field.
5. Tap OK.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Description
The percentage of power to supply to the lamp.
Enables or disables LiteLOC
algorithm that increases the power level to maintain lamp
brightness as the lamp ages.
™
Enables LiteLOC and maintains the current brightness level
for as long as possible. The Light Meter value is an arbitrary
unit of measure, not lumens or fL.
Lamp current in amperes.
Lamp voltage in volts.
Lamp power in watts.
Approximate Foot Lamberts reading on the light sensor. This
assumes a calibration was performed.
Number of hours the current lamp has operated.
The current light sensor reading in arbitrary units-of -measure
and does not represent actual lumens or fL.
™
. LiteLOC™ is a power control
51