Diagnostic Tools; Viewing Projector Information; Viewing Lamp Information; Adding Lamp End-Of-Life Indicator - Christie BOXER 30 User Manual

Hide thumbs Also See for BOXER 30:

Table of Contents

Diagnostic tools

Follow these procedures to help with diagnosing issues with the projector.

View the licenses for the software added to the projector and the licenses of the software used to

operate the projector. The information is read-only.

1. To view the additional software added to the projector, select MENU > Licenses.

2. To view the software licenses used to run the projector, select MENU > About.

Monitor the states of the lamps and the number of hours used.

1. Select MENU > Status > Lamp Info.

2. Use the right arrow to select the lamp list.

3. For a detailed view of a specific lamp, select Enter.

Specify the number of hours remaining before issuing an end-of-life indicator for the lamp.

1. Select MENU > Configuration > Lamp > Lamp Life Warning at (Hours).

2. Select Enter.

3. Use the right and left arrows to specify the number of hours remaining before issuing a lamp

end-of-life warning.

4. To save the adjustment, select Enter.

Use the Freeze Image diagnostic tool to examine in detail a still version of an incoming image.

For example, in moving images sometimes it is difficult to observe artifacts such as external de-

interlacing/resizing and signal noise.

1. Select MENU > Admin > Diagnostics.

Boxer 30 (Bb.2) User Manual

020-102016-02 Rev. 1 (02-2016)

Table of Contents