Turning The Lamp On; Aligning The Lamp - Christie CP2208 User Manual

Field
Lamp Expiry (Hours)
Hours Used
5. Tap Save.
6. Tap Next.

Turning the lamp on

On the projector touch panel controller (TPC) tap the lamp on (

Aligning the lamp

1. Tap Menu > Advanced Setup > Lamp Power.
2. Verify the value in the Power% field is at a level suitable for your requirements.
3. Tap Menu > Advanced Setup > Light Adjust.
4. Record the number in the Intensity field.
5. Tap Display Full Screen White Test Pattern.
6. Complete a coarse lamp adjustment:
a. Locate the Y axis adjustment label on the operator side of the projector.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Description
The number of hours the lamp can operate before replacement.
This field is auto-populated.
The number of hours the lamp has operated before installation.
Installing and Setting Up
) icon.
29