Stacking Projectors - Christie CP2208 User Manual

Stacking projectors

To stack CP2208 projectors, use the stacking kit provided with the projector. The CP2208 stacking
kit includes these parts:
Locking Bracket x 4
When stacking projectors, the optical axis of the projectors must be parallel to one another. The
maximum tilt for stacked projectors is 13 degrees. When you install the stacked projectors in a rack
stand or on a pedestal, the rack stand or the pedestal must remain horizontal. If you require tilt to
align your images, you must tilt the projectors and not the rack stand or pedestal.
1. On the bottom projector, remove the four corner screws securing the top lid.
2. Position a single stacking cup (011-104349-XX) over one of the empty screw holes so the
higher side of the cup faces outward and aligns with the projector skin.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Stacking Cup x 4
Installing and Setting Up
M6 Screw x 4
15