Modifying Projector Communication Settings; Adding A Network Device - Christie CP2208 User Manual

2. Adjust these settings:
Field
Time Zone
24 Hour Time
Adjust for Daylight Savings Time Automatically adjusts the time for daylight savings.
Time Offset
Apply Time Adjustment

Modifying projector communication settings

You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Communications Configuration.
2. Complete these fields:
Field
Device Name
IP Address
Subnet Mask
Gateway
Apply
Serial Speed (Baud)
Enable SNMP
SNMP V2 / SNMP V3
Management IP
Download MIB to USB
Apply
Serial Access
Ethernet Access

Adding a network device

You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Network Devices Setup.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Description
The time zone where the projector is installed.
Displays time in a 24-hour format.
Increases or decreases the projector time.
Applies time adjustment settings.
Description
The name of the projector.
The IP address of the projector.
The subnet mask to which the address belongs.
The IP address for the network gateway.
Applies Ethernet settings.
The baud rate of the serial port. The default is 115200.
Enables SNMP.
The SNMP protocol type. Contact Christie for the SNMP V3 user ID and
password.
The IP address where SNMP information and notifications are sent.
Sends the SNMP Management Information Base (MIB) file to a USB flash
drive.
Applies SNMP settings.
Grants access to serial connections.
Grants access to Ethernet connections.
Viewing and Modifying Projector Settings
67