Christie CP2208 User Manual page 88

b. Hold the cathode end of the lamp with your right hand and the anode end with your left
hand and carefully turn the lamp with your right hand so that it unthreads from the
extension nut. Make sure the lamp does not contact the reflector or the UV filter.
c. With your left hand guide the cathode end of the lamp out of the reflector, on an angle
through the lamp access door.
11. For CDXL-19SC or CDXL-21S1 lamps:
a. Loosen the cathode screw (D) on the cathode clamp (F).
b. Hold the anode end of the lamp with your left hand and then carefully unscrew and
remove the cathode nut with your right hand (E).
c. As you hold the anode end of the lamp, carefully guide the lamp through the reflector
ensuring not to make contact with the reflector.
d. With your right hand guide the cathode end out of the reflector, on an angle through the
lamp access door.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Anode Terminal
A
Anode Wire
B
Reflector
C
Cathode Screw
D
Cathode Nut
E
Cathode Clamp
F
Maintenance
88