Verifying 3D Cinema Content; Troubleshooting 3D; Reversed 3D Effect (Pseudo 3D); Image Is Too Dark - Christie CP2208 User Manual

Verifying 3D cinema content

1. Put on a pair of 3D glasses.
2. Play the 3D content.
3. Verify the left and right eye display correctly.
4. If the image is reversed:
a. Tap Menu > Channel Setup on the projector touch pad controller (TPC).
b. Select a 3D channel in the Channel Name list.
c. Select Inverted in the 3D Sync Polarity list.

Troubleshooting 3D

In addition to the information provided in this topic, it is also recommend that you consult the
documentation provided with your 3D hardware to help resolve issues.

Reversed 3D effect (Pseudo 3D)

1. Put your 3D glasses on upside down so the left lens is over your right eye and the right lens is
over your right eye.
2. If the image appears correct:
a. Tap Menu > Channel Setup on the projector touch pad controller (TPC).
b. Select a 3D channel in the Channel Name list.
c. Select Inverted or True in the 3D Sync Polarity list.
Image Breakup
1. Tap Menu > Channel Setup.
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Control in the left pane.
4. Lower the Dark Time field value to match the values of your 3D system.

Image is too dark

The lamp power for 3D content is typically twice as high as for 2D content except when you are
using a RealD XL device.
1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC™ Setup.
2. Increase the value in the Power % field.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Viewing 3D Content
82