3. Modify the TCGD file settings.
4. Tap Save.
Creating a new ILS file
1. Tap Menu > Advanced Setup > ILS File Setup
2. Tap Save As.
3. Enter a name for the ILS file in the Filename field.
4. Tap OK.
5. Tap the left or right icons in the Focus area to adjust the focus of the image on the screen.
6. Tap the positive or negative icons in the Zoom area to adjust the image focus.
7. Tap the forward, backward, left, or right arrow icons in the Offset area to move the position of
the image on the screen.
8. Tap Save.
Editing an existing ILS file
1. Tap Menu > Advanced Setup > ILS File Setup.
2. Select an ILS file in the Current ILS File list.
3. Tap the left or right icons in the Focus area to adjust the focus of the image on the screen.
4. Tap the positive or negative icons in the Zoom area to adjust the image focus.
5. Tap the forward, backward, left, or right arrow icons in the Offset area to move the position of
the image on the screen.
6. Tap Save.
Enabling automatic ILS adjustment on a channel
1. On the main screen of the TPC, tap a channel in the Preferred Channels pane.
2. Tap the Lens Adjust icon.
3. Select Enable Automatic ILS.
4. Tap OK.
Resetting ILS file settings
You must reset the Intelligent Lens System (ILS) when you move the lens, you have manually
adjusted horizontal or vertical offset, focus, or zoom or when a power outage occurs during a
channel change.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Managing Projector Setting Files
61