Christie CP2208 User Manual page 44

Control
Status LED
Status Error Message
Channel Buttons
All Channels Button
Power
Power OFF Power ON
Lamp
Lamp OFF Lamp ON
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Accessing the Projector and Running Diagnostics
Description
Displays a green, yellow, or red LED. A green LED indicates that
the projector is operating properly. If a monitored system falls
below a normal reading, the LED is yellow or red. A yellow LED
indicates a warning, and a red LED indicates a critical error that
you must correct. Click the status LED to open the Status window
and resolve issues.
Displays custom projector settings.
Displays 64 saved channels.
Turns the projector on or off. Press off to place the projector in
stand-by mode. To prevent accidental activation, you must press
and hold the on or off buttons. A message displays in the title bar
when the projector turns on or off.
Turns the lamp on or off. To prevent accidental activation, you
must press and hold the on or off buttons. A boot delay occurs if
you select lamp on before pressing power on.
44