Modifying an existing lamp file
1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Select a lamp file in the Current Lamp File list.
3. Modify the lamp file settings.
4. Tap Save. If you want to revert your changes, tap Revert before you tap Save.
Enabling or disabling LiteLOC on a lamp file
LiteLOC™ is a power control algorithm that increases the power level to maintain lamp brightness
as the lamp ages.
1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Select a lamp file in the Current Lamp File list.
3. Tap Enable LiteLOC to enable LiteLOC.
- or -
Clear the Enable LiteLOC check box to disable LiteLOC.
4. Tap Save.
Adjusting lamp power
1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup
2. Increase or decrease the Power % value.
3. Tap Set Target.
4. Select Enable LiteLOC™.
Changing the lamp power percentage
Entering a new Lamp Power percentage temporarily disables LiteLOC settings.
1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Increase or decrease the Power % value.
Viewing lamp information
To view information about the lamps previously installed in the projector:
Tap Menu > Advanced Setup > Lamp History.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Managing Lamp Information
.
52