Managing the DLP
This section provides procedures for managing the Integrated Cinema Processor (ICP) electronics.
To access the DLP menus, you need Administrator or Service permissions
Stopping DLP communication
It is recommended that you stop DLP communication when you perform DLP maintenance.
1. Tap Menu > Diagnostics > DLP Management.
2. Tap Stop DLP Communication.
3. Tap Acknowledge.
Resetting the DLP
To remove image artifacts from the screen, try resetting the DLP before restarting the projector. Do
not reset the DLP if content is playing.
1. Tap Menu > Diagnostics > DLP Management.
2. Tap Reset DLP.
3. Tap Yes.
4. Tap Acknowledge if an alarm appears.
Running a DLP self test
Run a DLP self test to test the functionality of the Integrated Cinema Processor (ICP) and DLP.
1. Tap Menu > Diagnostics > DLP Management.
2. Tap DLP Self Test.
3. Tap Yes.
4. Tap Clear Results to close the Results pane.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
49