7. For a finer adjustment, repeat steps 5 and 6 but take the readings at the center of the screen
instead of at the lens.
View lamp information
To view a history of all previously installed lamps, on the touch panel controller, tap Menu > Lamp
> Lamp History.
Track lamp intensity with LiteLoc
Use the LiteLoc feature to maintain a constant level of brightness over the lifetime of the lamp.
1. On the touch panel controller, tap Menu > Lamp > Lamp Power.
2. To adjust the lamp power, use the slider or enter a value until the display is as bright as
required.
3. Tap OK.
4. Tap Lamp Mode.
5. Tap Constant Intensity.
Notice the Lamp Power option is greyed out so you cannot adjust it. To readjust the lamp
power, select Lamp Mode > Lamp Power. From the Lamp Power option, adjust the power
setting as applicable.
Lamp details
Lamp Type
CDXL-20 (2.0 kW)
CDXL-20SP (2.0 kW)
CDXL-30 (3.0 kW)
CDXL-30SP (3.0 kW)
CDXL-45 (4.5 kW)
CDXL-60 (6.0 kW)
Record new lamp information
The lamp serial number is an alphanumeric, user-defined field. Christie recommends choosing a
i
distinct and descriptive name for every individual lamp.
1. On the touch panel controller, tap Menu > Lamp > Change Lamp.
2. Enter a Lamp Type, Serial Number and Hours Used.
3. Tap Apply Lamp Change.
Mirage 4K35 User Manual
020-101377-03 Rev. 1 (07-2015)
Replace Before
2400 hours
3200 hours
1500 hours
1900 hours
1000 hours
600 hours
Min. Lamp Power
1000W (50%)
1400W
2000W (67%)
2100W
2300W (51%)
2750W (46%)
Operation
Max. Lamp Power
2200W (110%)
2000W
3300W (110%)
3000W
4950W (110%)
6600W (110%)
59