1. Tap Menu > Advanced Setup > ILS File Setup.
2. Select an ILS file in the Current ILS File list.
3. Tap Quick Reset.
4. Tap Yes.
Adding a lens serial number
1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. Tap the Launch Dialog (
4. Enter the serial number for the lens and then tap Enter.
5. Tap Save.
Enabling automatic ILS on a lens
Use this procedure to move the lens to a position specified by the channel settings.
1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. Select Enable Automatic ILS in the Intelligent Lens System area.
Resetting the lens position on projector startup
1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. Select Reset on Startup in the Intelligent Lens System area.
Completing a full lens calibration
1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. Tap Full Calibration in the Intelligent Lens System area.
4. Tap Yes.
Resetting the ILS and the lens position
1. Tap Menu > Advanced Setup > Lens Setup.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
) icon in the Serial Number field.
Managing Projector Setting Files
62