Color Calibrating; Screen Masking - Christie CP2208 User Manual

5. If the black corner remains, insert a hex driver in the second set screw (C) and a hex driver in
the second cap screw (D).
6. Equally turn the set screw (A) and cap screw (B) in opposite directions until the black corner is
removed.
7. Replace the top lid.

Color calibrating

Create Measured Color Gamut Data (MCGD) files to correct on-screen colors. A colorimeter is
required to complete this procedure. Measure the colors displayed on the screen from the center of
the audience viewing location. See

Screen masking

You use masking to conceal the unused edges of a screen. These are the two most common types of
screen masking:
• Top Masking – Movable flat black panels or curtains are installed along the top edge of the
screen. You raise the curtain for flat images, and you lower the curtain for scope images.
• Side Masking – Movable flat black panels or curtains are installed on each side of the screen.
You close the curtain for flat images, and open the curtain and zoom for scope images.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Set Screw (x2)
C
Cap Screw (x2)
D
Creating a MCGD file
Adjusting the Image
C
D
on page 59
.
41